Pool Maintenance

Professional Pool Maintenance Services

Don’t let pool maintenance become a summer chore. While a swimming pool is the perfect escape from the heat, keeping that water crystal-clear requires consistent care. DMV Pool Service removes the burden of pool ownership, providing expert cleaning so your only job is to dive in. We offer flexible weekly and bi-weekly pool maintenance plans designed to keep your water safe, healthy, and sparkling. Whether you need a complete care plan or just routine cleanings, DMV Pool Service ensures your pool stays crystal-clear and swim-ready all season long.

Our pool maintenance packages are perfect for homeowners who value their time. If you want a “jump-in ready” pool 24/7, our weekly pool cleaning is the gold standard. Choose Your Pool Service Plan:

Weekly Maintenance

$ 2,995
  • 1 SPRING POOL OPENING (reg.$550+)
  • 15 WEEKLY VISITS (reg.$160)
  • 1 FALL POOL CLOSING (reg.$550+)
  • 1 WINTER PROTECTION SERVICE VISIT (reg.$300)
  • WATER BALANCE CHEMICALS INCLUDED*
  • Additional Maintenance Visits – at request
  • 4 Payments Schedule Available
Select Plan
– See Full-Service Description Below…

Bi-Weekly Maintenance

$ 2,190
  • 1 SPRING POOL OPENING (reg.$550+)
  • 8 WEEKLY VISITS (reg.$160)
  • 1 FALL POOL CLOSING (reg.$550+)
  • 1 WINTER PROTECTION SERVICE VISIT (reg.$300)
  • WATER BALANCE CHEMICALS INCLUDED*
  • Additional Maintenance Visits – at request
  • 3 Payments Schedule Available
Select Plan
– See Full-Service Description Below…

Opening and closing

$ 1,000
  • 1 SPRING POOL OPENING (reg.$550+)
  • 1 FALL POOL CLOSING (reg.$550+)
  • WATER BALANCE CHEMICALS INCLUDED*
  • Additional Maintenance Visits – at request
Select Plan
– See Full-Service Description Below…

NOTE: Weekly  Pool Maintenance Packages, including – FREE Winter Protection Service Visit ( regular price – $300 ). See the full description below. We also provide packages on twice a weekly and monthly bases.

Spring Pool Opening: at $550

  • Inspect, remove, clean up, and fold the swimming pool/SPA cover. Storage in place indicated by the Owner. Inspect pool/spa shell for structural damage or other conditions
  • Blow all leaves and debris from the pool/spa deck
  • Check the condition of the sand/glass filter, cartridges, or D.E. grids. Clean or replace after Owner’s approval
  • Visually inspect and assemble pool/spa pump and other pool equipment ( buster pumps, filters, heaters, feeders, etc. )
  • Inspect the pool equipment breaker panel. Turn ON the system breakers. Prime the pool system.
  • Check water circulation for adequate flow
  • Re-installation on ladders and handrails
  • Vacuum swimming pool interior for up to 1 hour, using an external vacuum pump and power vac
  • Water chemical tests, Startup Chemicals, and Diatomaceous Earth (DE) is included with the startup. Up to 3 bags of Salt included ( for saltwater pools )
  • Visually Inspect Pump, Filter, and Heater for Proper Operations and report to the Owner
  • Visually inspect all pool equipment and pipes for leaks
  • Follow-up visit (add $170) – Re-vacuum the pool after 1-3 days ( 45 min ), re-test and balance water ( PH, Cl, Total Alkalinity, Calcium Hardness, and Cyanuric Acid ), Skim water surface, Backwash and Clean/Wash filters, Clean pump hair-lint strainer.
  • An additional charge of $50 may apply for separate water vessels and features like SPA, Water Fall, Water Slide, Pool Retaining wall, etc.
    * We Appreciate, If the Customer fills the pool water prior to the scheduled date of service. ( above the point of the middle of the tile or middle of the skimmer throat).
    Swimming Pools with tarps or other non-safety pool cover applications may add an extra charge.

Fall Pool Closing: at $550

  • Lower pool water to a proper Level ( 12-18 in. )
  • Pressure air blowing all Pool/SPA lines and pool equipment
  • Winterize filtration system and equipment ( Pumps, filters, heater, heat pump, chlorine sanitizers, water feature pumps, salt generator (if present), etc.) Remove all drain plugs from the equipment and store
  • Add antifreeze to skimmers and pool lines
  • Install all inlet and outlet winterization plugs
  • Remove pool deck equipment – handrails, ladders, etc.
  • Store deck equipment in the proper location indicated by the Owner
  • Winterize the pool heater and turn off the gas supply
  • Add winter algaecide and all winter chemicals as needed
  • Install the Owner’s pool cover, if available
  • Inspect and report to the Owner
  • An additional charge of $50 may apply to winterize separate water vessels and features like SPA, Water Fall, Water Slide, Pool Retaining wall, etc.

Swimming Pool Maintenance Visit – starts $ 160.00

  • Water test, check all components of the balanced water ( PH, Cl/Br, Total Alkalinity, Stabilizer ( Cyanuric acid ), Calcium hardness, Salt level (if saltwater)
  • Check pool/SPA equipment (pumps, filters, heater, sanitizer feeder, salt generator, etc.) for proper operations, damages, and leaks.
  • Vacuum swimming pool interior
  • Skim water surface
  • Brush the Swimming pool basin, if needed
  • Clean tile line, if needed
  • Clean the pump hair-lint strainer and inspect the strainer basket for damage.
  • Clean skimmer baskets, or other suction lines and main drain covers
  • Backwash and clean filters (Sand/Glass or D.E. ), Wash Cartridge filters, if needed
  • Air blow deck area around pool/spa
  • Add all needed chemicals to balance Pool/SPA water ( PH, Cl/Br, Total Alkalinity, Stabilizer ( Cyanuric acid ), Calcium hardness).
  • Inspect and adjust the pool timers, if present
  • Notify the owner if there are recommendations or repairs needed.

Winter Protection Service – at $250.00

  • Monthly service available ( from November to March)
  • Water level adjustment (pool tiles freezing protect & pool cover damage)
  • Chemical test, add chlorine shock, refill chlorine floaters (if available)-add $100
  • Inspect and adjust the pool cover ( for correct fit and lifelong)
  • Snow and debris removal from pool cover ( if needed )
  • Visual inspection of the pool area and pool filtration system – pumps, filters, heater, sanitizer feeder, salt generator, etc.  ( written report can be provided )